Journeyman Millwright

Need 2 journeyman Millwrights to work on the following at a mine site:

-2 Vertimills

-9 Pumps

-2 Blowers

-2 Tube Conveyors

Below are the list of tools for the job. Some of these will be provided, but owning 80% of these shows you would be the type of Millwright we are looking for.

• 25' Tape Measure
• 8M Tape Measure
• 100' Reel-type tape
• 15M Reel-type tape
• 2-Plum Bobs
• 4lb Hammer
• Scribing tool
• Protractor
• Screwdriver (1/m-flat head, 1/m Phillips head)
• Tin Snips
• Center Head Punch
• 2' Level
• Torpedo Level 12”
• 4- Small thin Brass wedges
• Needle Nose Pliers
• Slip Joint Plier
• Brass Hammer
• Rubber Mallet
• Flashlight
• Raincoat or poncho
• 2- Blue Pens
• Mechanical Pencil
• Toolbox with Lock
• 1- Snap Ring Pliers (set)
• Sleever Bar
• Honing Stone
• 1- Brass Drift punch set
• 1- Transfer punch set
• 1- Precision file set
• 1- Pick set
• 1- Tread Gage Metric & Standard
• 1- Telescopic mirror
• 1- Telescopic magnet
• Combination Wrenches (3/8"-1 1/4")
• Combination Wrenches (10-31mm)
• Socket set 1/2" drive, (3/8"-1-1/4")
• Socket set 1/2" drive, (10-31mm)
• Allen wrenches (up to 3/8") Standard and (up to 10mm) Metric
• 12” Square Starrett Combination Square with Center Head (Starrett or equal)
• 6’ Square Starrett Combination Square (Starrett or equal)
• 6” Starrett Scale (Starrett or equal)
• 12” Starrett Scale (Starrett or equal)
• 2’ Machinist Straightedge (Starrett or equal)
• 2- Sets of thickness gauges (Feeler Gauges) (Starrett or equal)
• Precision 12”: Level (Starrett 98 or equal)
• Precision 8”: Level (Starrett 98 or equal)
• Precision 6”: Level (Starrett 98 or equal)
• 4- Starrett 196 Dial indicator sets (Starrett or equal)
• 4- Mag Bases
• 1- Set of Telescoping Gages 13mm to 150mm (1/2” to 6”) (Starrett or equal)
• Slide Caliper 0.001” up to a 12” range (Starrett or equal)
• 0 to1” Micrometer (Outside) (Starrett or equal)
• 1- Inside Micrometer set 2” to 8” range, .001” (Starrett or equal)
• Alignment Jigs
• 2- 1’’ travel dial indicator (Starrett or equal)
• 2- 1/2’’ travel dial indicator (Starrett or equal)
• 1- Set of 1-2-3 Blocks (Starrett or equal)